EnglishSpanishRussianFrench

Customize Bathtub Drain Overflow kit Factory

shower-drain kit

Customize Bathtub Drain Overflow Kit

Request A Catalogue for Bathtub Waste

You’ve come to the right place, and we provide tons of bathtub waste drain kit solutions for our clients.

Bathtub Drain Overflow Kit Manufacturer FAQ

Yes, as long as you provide the dimension drawings or just simply tell us your requirements, we will make few samples for you to check.

For the modified product, a sample would take a week to make. After sample verification with clients,  the production time for bulk order will take 20-30days depends on the quantity.

Yes, warmly welcome to get some samples from our factory. However, we only offer free samples, you need to pay for the cost of freight. But we will refund the cost after you order mass production.

We guarantee our products for 3 years. Our mechanism spring lifetime is about 80,000 times.

For stocked items, it will take a week to dispatch , otherwise better allow us 20 days to prepare.

Request Your FreeBathtub Drain Overflow Kit Quote Now

We will provide you with a free quote within 24 hours, and we respect your privacy.

Bathtub Drain Overflow Kit – Ultimate Guide

One of the most important aspects of any bathroom is the bathtub. It is essential to have a sound drainage system to be easily drained, and the tub can be cleaned. We will discuss the different types of bathtub drains available on the market and how to install them. We will also look at some applications of Bath Waste with Overflow Assembly in bathroom design.

    Add a header to begin generating the table of contents

    Bathtub drains come in a variety of shapes and sizes. The most common type is the drain plug, inserted into the drain hole to block water from flowing out. There are also overflow drains, which allow water to flow out if the plug is not inserted properly. Finally, floor-mounted drains are installed on the floor of the bathroom and collect water as it flows down.

    Bath Waste with Overflow Assembly can be used in any bathroom design. They are especially useful in small bathrooms where space is limited. By installing a Bath Waste with Overflow Assembly, you can ensure that your bathroom will have proper drainage without taking up too much space.

    If you are planning on remodeling your bathroom or building a new home, be sure to consider the different types of bathtub drains available. Bath Waste with Overflow Assembly is an excellent option for any bathroom. With proper installation, they can provide years of trouble-free use. Contact a local plumber or contractor today to discuss your options.

    1. Sizes and materials of Bath Pop Up Waste Components

    -Bathtub drains come in a variety of shapes and sizes. The most common type is the drain plug, inserted into the drain hole to block water from flowing out. There are also overflow drains, which allow water to flow out if the plug is not inserted properly. Finally, floor-mounted drains are installed on the floor of the bathroom and collect water as it flows down.

    -Bath Waste with Overflow Assembly can be used in any bathroom design. They are especially useful in small bathrooms where space is limited. By installing a Bath Waste with Overflow Assembly, you can ensure that your bathroom will have proper drainage without taking up too much space.

    If you are planning on remodeling your bathroom or building a new home, be sure to consider the different types of bathtub drains available. Bath Waste with Overflow Assembly is an excellent option for any bathroom. With proper installation, they can provide years of trouble-free use. Contact a local plumber or contractor today to discuss your options.

    • Materials: brass or plastic
    • Sizes:
    • height: 80mm
    • width: 75mm
    • length: 550-700mm

    2. How to install Sprung Brushed Waste & Overflow

    -Remove the old overflow cover and seal from the bathtub by unscrewing it. If necessary, use a screwdriver to loosen the screws.

    -Clean any old sealant or caulk from around the edge of the bathtub opening. This will help ensure a good seal between the new overflow and the tub.

    -Fit the new overflow cover into place and tighten the screws. Be sure to check that it is properly sealed against the tub.

    -Thread one end of the metal waste pipe onto the threaded outlet on top of the overflow assembly. Tighten with pliers if necessary.

    -Slip the other end of the waste pipe over either side of the drain inlet on your bathtub (depending on which side the overflow is installed).

    -Tighten the connection with pliers.

    -Apply a bead of silicone sealant around the edge of the overflow cover, taking care not to get any on the surface of the tub. This will help create a watertight seal.

    -Allow the silicone to dry for 24 hours before using your bathtub. Test the overflow by slowly filling your tub with water and ensuring no leaks occur.

    3. How to use Tip-Toe Bathtub Drain&Overflow?

    -When the bathtub is complete, water will flow out of the overflow drain and into the waste pipe.

    -If you do not want to use the overflow drain, insert the plug into the hole to block it.

    -To clean the hair or other debris from the overflow drain, remove the cover and scoop it out with a spoon. Do not use your hands, as this could cause bacteria to spread.

    -Replace the cover after cleaning.

    • height: 400mm
    • width: 60mm
    • length: 640mm
    • height adjustable from 400-420 mm

    4. What’s a Tip-Toe Bathtub Drain & Overflow?

    -A Tip-Toe Bathtub Drain&Overflow is a bathtub drain kit with an overflow that helps to prevent water from spilling out onto the floor when the tub is full. It is an excellent option for small bathrooms where space is limited.

    -The Tip-Toe Bathtub Drain&Overflow consists of two parts: an overflow assembly and a waste pipe. The overflow assembly is installed on the side of the tub, and the waste pipe connects to the top of the overflow assembly.

    -When the bathtub is complete, water will flow out of the overflow drain and into the waste pipe. If you do not want to use the overflow drain, insert the plug into the hole block it.

    5. How to choose Trip Lever Bath Waste Drain?

    -There are many different types of bathtub drains available on the market, so it is important to choose one that will work best for your needs.

    -One type of bathtub drain is the Trip Lever Bath Waste Drain. This type of drain has a lever used to open and close the drain. It is a good option for those who want to control the drainage of their tub.

    -Another type of bathtub drain is the Automatic Shut Off Valve Drain. This type of drain will automatically shut off when the water level in the tub gets too high. This is an excellent option for those who want to avoid overflows.

    -When choosing a bathtub drain, it is important to consider the size of the opening, the height of the overflow, and the type of lever or valve. Be sure to read the product specifications carefully to ensure that the drain will fit your bathtub.

    -Thread one end of the metal waste pipe onto the threaded outlet on top of the overflow assembly. Tighten with pliers if necessary.

    -Slip the other end of the waste pipe over either side of the drain inlet on your bathtub (depending on which side the overflow is installed).

    6. Spare parts of the bathtub drain kit

    -If the waste pipe becomes clogged, you can remove it and clean it out. Loosen the screws on either end of the pipe and pull it out.

    -If the overflow cover becomes dirty or clogged, you can remove it and clean it with a damp cloth. Be sure to dry it thoroughly before replacing it.

    -The bathtub drain kit comes with a few spare parts if something happens to one of the components. Keep these spares in a safe place to have them handy if needed.

    Get Free Samples

    Get In Touch Now!

    *We respect your confidentiality and all information is protected.