Description

Tip Toe Bathtub Tub Drain Conversion Kit Assembly

HF-0091

Tub Drain Trim Kit with Two Hole Overflow Faceplate

The bathtub drain kit assembly is made of original solid brass and stainless steel 304 material. This tub drain kit provides strength and reliability.

This tub drain trim kit with thread adapter fits 1-3/8 inches or 1-1/2 inches of tub drain waste as optional

This bathtub drain kit is easy to push to open and push again, then close with our hands

This tub drain and overflow kit with 1-3/8 in. NPSM thread connection is suitable for bathtub drain system and 1-1/2 in. NPSM American adapter optional

bathtub drain kit including washer, Two-hole overflow faceplate, Two pieces 1/4 in.-20 UNC faceplate screws.

Bathtub trim set with tip-toe drain plug and faceplate

1-5/8 inch O.D. refined thread exterior fits 1-3/8 inch NPSM (16 UNC)

1-7/8 inch O.D. coarse thread exterior fits 1-1/2 inch NPSM (11.5 UNC)

Introduction: what is the Tip Toe Bathtub Tub Drain Conversion Kit?

A Tip Toe Bathtub Tub Drain Conversion Kit can save you the time and hassle of trying to unclog a bathtub drain. The kit contains everything you need to convert your tub drain from a standard to a tip-toe configuration.

The Tip Toe Bathtub Tub Drain Conversion Kit includes a new drain strainer, drain body, and overflow plate. The kit also comes with installation instructions.

The Tip Toe configuration is easier to clean because it has fewer nooks and crannies for hair and debris to get stuck in. The conversion only takes about an hour to complete.

Upgrading or replacing a bathtub’s drain system can significantly improve its functionality and aesthetic appeal. The Tip Toe Bathtub Tub Drain Conversion Kit is a popular choice for many homeowners and contractors because of its ease of use and stylish appearance. Here’s a step-by-step guide to understanding and assembling this kit.

Components of the Tip Toe Bathtub Tub Drain Conversion Kit:

• Tip Toe Drain Stopper: This allows you to open and close the drain with a simple push easily.
• Overflow Plate: Serves as a safety feature to prevent water from overflowing in the tub.
• Waste and Overflow Tube: Directs water from the tub to the drainpipe.
• Adapter and bushing fittings: To ensure a tight and leak-proof fit.
• Gaskets and Washers: Provides a secure seal.

Tools Required:

• Adjustable wrench
• Plumber’s putty
• Screwdriver
• Teflon tape

Step 1: remove the old drain.

A new product has recently come on the market that is sure to be a game changer for those who have difficulty bending down and reaching their feet in the bathtub. The Tip Toe Bathtub Tub Drain Conversion Kit Assembly allows you to convert your bathtub drain from a standard location to a more reachable one. This can be done in just a few minutes without calling a plumber.

Step 2: clean out the drain hole

Assuming you have a clogged drain hole, the first step is to clean it out. You can do this by using a plunger or a plumber’s snake. If you have a plunger, simply place it over the drain hole and pump it up and down. The suction will help to dislodge the clog. If you’re using a snake, insert it into the drain hole and turn it clockwise. The snake will grab onto the clog and allow you to pull it out. Once the clog is removed, flush the drain with hot water to remove any debris.

Step 3: Install a new drain gasket.

A bathtub drain conversion kit can save you the hassle and expense of having to replace your tub. The kit includes a new drain, overflow plate, and screws. You will need a screwdriver, pliers, and a hammer to assemble the kit. The first step is to remove the old drain. Use the screwdriver to remove the screws holding the overflow plate. Then, use the hammer to tap the overflow plate until it comes loose lightly. Next, use the pliers to twist and pull the old drain out of the tub.

Step 4: Install new strainer body

Assuming you’re talking about a sink:

Installing a new strainer body is easy with a few simple tools. You’ll need a wrench to loosen the old strainer body and a Phillips head screwdriver to remove it. Then, line up the holes with the screws on the sink, take the new strainer body. Use the Phillips head screwdriver to tighten it in place. Finally, use the wrench to snug everything down.

Step 5: Install new tip-toe

If you want to convert your regular bathtub drain to a Tip Toe Drain, follow these easy steps. You can have your new Tip Toe Drain installed and working properly in just a few minutes.

1. Begin by removing the old drain from your tub. You’ll need a wrench or pliers to loosen the screws that hold it in place.
2. Once the old drain is removed, clean out any debris or gunk that may be left behind.
3. Next, take the new Tip Toe Drain and line it up with the opening in your tub. Make sure that the drain is centered and level before proceeding.
4. Use the provided screws to attach the new drain in place. Again, make sure that everything is tight and level before moving on.
5. Now that you’ve attached the new drain, it’s time to assemble the toilet.  Put the tank bolts back in place and tighten.