Description
P-trap toilet with Cleanout
HF-0063
Size; 11/4” and 11/2”
Materials; brass tube and stainless steel, both available
17Gauge-22 Gauge;
Cleanout; brass and zinc alloy
Chrome plated surface brings a better rust-proof and decorative looking for exposed installation.
Introduction: what is a P-trap toilet, and why is a cleanout necessary?
You’re in luck if you have a P-trap toilet with a cleanout. This type of toilet is easy to clean and maintain. Here are some tips on how to keep your P-trap toilet clean and work properly.
- First, you should check to see if the cleanout is easy to access. If it’s not very accessible, you might want to consider remodeling your bathroom to make it easier for you to reach.
- Â Next, hold the handle on the cleanout while you flush the toilet. If water stays in the bowl after flushing or starts running again when you turn off the handle, you need to replace the fill valve. 3. First, shut off the water to the toilet at the wall. Flush the toilet to drain as much water in the tank as possible. Then, remove the screws holding the handle on top of the tank. Pull off this part of the tank and set it aside.
What are the benefits of a P-trap toilet with cleanout?
A P-trap toilet with a cleanout is a great way to keep your toilet clean and free of clogs. The P-trap is designed to trap sewage and prevent it from backing up into your home, while the cleanout allows you to remove any clogs that may form in the trap. This combination can help to keep your toilet running smoothly and prevent costly repairs.
How to install a P-trap toilet with cleanout?
A P-trap toilet with cleanout is a type of toilet that includes a trapdoor for easy access to the drain pipe. This type of toilet is ideal for homes with small children or pets, as it eliminates the need to remove the entire toilet bowl to clear a clog.
To install a P-trap toilet with cleanout, begin by removing the old toilet bowl and tank. Next, use a hacksaw to cut the PVC pipe that extends from the wall flange. Cut this pipe at an angle to fit into the new P-trap.
Next, attach the new P-trap to the wall flange using screws and washers. Finally, connect the PVC pipe to the P-trap and secure it with PVC cement.
How to maintain a P-trap toilet with cleanout?
Assuming you have a P-trap toilet with a cleanout, there are a few things you need to do to maintain it and keep it clean. First, make sure you regularly check the cleanout for any blockages or buildup. Use a plunger or plumber’s snake to clear it out if you see anything. Second, pour some boiling water down the drain every few weeks to help dissolve any grease or soap scum that may be starting to accumulate. Finally, once a year or so, unscrew the cleanout plug and use a wire brush to clean out the inside of the trap itself. This will help prevent odors and keep your P-trap functioning properly.
Conclusion: why you should consider installing a P-trap toilet with cleanout.
If you’re considering installing a new toilet, you may want to consider a P-trap toilet with cleanout. This type of toilet is designed to prevent clogs and backups, and the cleanout feature makes it easy to keep your toilet clean and free of debris. Here are a few reasons why you should consider installing a P-trap toilet with cleanout:
- They’re designed to prevent clogs.
- The cleanout feature makes it easy to keep your toilet clean.
- They’re less likely to back up than other types of toilets.
