Brass Slip Joint Extension Tube

Brass Slip Joint Extension Tube

A brass slip joint extension tube is a plumbing fitting typically used to connect two pipes or fixtures. It consists of a male and female end that fit together, with the male end slightly larger than the female end. The connection is made by inserting the smaller end into the larger end and tightening a nut or screw.

Description

Brass Slip Joint Extension Tube

HF-0069

P Trap Extension Pipe with Nut and Rubber Washer, Sink Drain Tailpiece

 

Diameter: 1-1/4 in. OD; Length: 12 inch

This wall tube is built with solid brass, with brass nut and rubber washer, construction for durability

The immersion tube is the 12-inch in length and can be cut to the length you need for your sink

Coming with a rubber washer and threaded slip joint nut, the extension pipe can seal easily

For easy connection in your bathroom or kitchen, extend the drain tailpiece to trap or trap the tailpiece to the wall

Slip Joint Extension Tube for P trap Extension and Sink Drain Extension
1-1/4 inch Outer Diameter
12-inch length
Brass, Slip Joint Extension Tube

 

Introduction: what is a brass slip joint extension tube?

A brass slip joint extension tube is a plumbing fitting typically used to connect two pipes or fixtures. It consists of a male and female end that fit together, with the male end slightly larger than the female end. The connection is made by inserting the smaller end into the larger end and tightening a nut or screw. Brass slip joint extension tubes are commonly used in situations where the length of the pipe needs to be adjustable, such as in sink drain applications. Installation how to install a brass slip joint extension tube?

Start by inserting the smaller end of the tube into the larger end. The fit should be snug but not so tight that it prevents the tube from being inserted or removed.

Use: common uses for a brass slip joint extension tube

Brass slip joint extension tubes are commonly used to extend the reach of a water line or gas line. They are also used to connect two pieces of pipe together or a piece of pipe to a fitting. Brass slip joint extension tubes are commonly used to extend the reach of a water line or gas line. They are also used to connect two pieces of pipe together or a piece of pipe to a fitting.

 

Advantages: why choose a brass slip joint extension tube?

If your bathroom or kitchen sink is too low, you can raise it with a brass slip joint extension tube. This easy-to-install part screws onto the slip nut of the drain and extends the tailpiece by 3 to 4 inches. Before installing the extension tube, you’ll need a pair of slip-joint pliers to remove the old slip nut and tailpiece. You can find them at a plumbing supply store or hire a plumber to do the job.

 

Advantages why choose a brass slip joint extension tube? If your bathroom or kitchen sink is too low, you can raise it with a brass slip joint extension tube. This is much cheaper than calling a plumber and installing a new sink. The brass slip joint extension tube can also be used for many other things around the house.

 

Disadvantages: what are the disadvantages of a brass slip joint extension tube?

There are a few disadvantages to using a brass slip joint extension tube. First, if the tube is not sealed correctly, it can leak. Second, the tube is not as strong as some other materials, so it can dent or bend if not handled carefully. Finally, brass is a relatively soft metal that can scratch easily.

 

Conclusion: summary of pros and cons of a brass slip joint extension tube

A brass slip joint extension tube can be a great way to extend the reach of your piping. However, there are pros and cons to consider before deciding if this is the right option for you.

 

PROS:

-Can be used with most types of piping

It-Easy to install

-Inexpensive

 

CONS:

-May not be as durable as other options

-Can corrode over time

 

A brass slip joint extension tube is a good option if you’re looking for a quick and easy way to extend your piping. However, remember that it may not be as durable as other options and can corrode over time.

 

Additional information

Size

1-1/4 in. OD

Materials

Brass/stainless steel

Finishing

Polishing, Chrome Plated

Warranty

24 months

Media

Water, Waste Water, Oil, Sea Water

Type

Drains

MOQ

1000

Lead time

40 days

Payment

T/T,L/C

Get Free Samples

Get In Touch Now!

*We respect your confidentiality and all information is protected.

× How can I help you?